Rule-A-Matic Float Switch 35A (CE Approved)
Rule-A-Matic Bilge Pump Float Switch 35A
Year after year, the Rule-A-Matic 35A has been the switch of choice for boaters the world over. Rule's latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade "blocked" wire. Designed for pumps drawing up to 14 Amps
Features
For automatic on/off bilge pump control
Marine quality corrosion free wiring .
Switch design prevents rapid on/off cycling.
Environmetally friendly - New Mercury free model
Removeable base for cleaning
Specification
Voltage:For 12 -24v DC
Max.Amps: Suitable for pumps drawing up to 14 Amps
Dimensions: 127mm long, 40mm wide, 110mm high (at max. lift)
Mounting Position and Installation
The Rule Float Switch should be mounted at the lowest point in the bilges or at the height required to control the water level. Ensure the switch is upright and that there is sufficient clearance for the float when in the fully up position.
It should be mounted fore and aft with the hinged end pointing towards the bow. This helps prevent rapid on/off cycling if the boat rolls sideways
The switched should be installed on the positive lead. Use tinned wire
- Stock: In Stock
- Brand: Rule
- Model: 55020
€50.00
Ex Tax: €50.00